2009 Super Vac CAFS Brush Truck
2009 Super Vac CAFS Brush Truck
Details
New F550 4×4 new chassis
Remounted 1999 SVI box
Darley Weapon CAFS
SVI Trucks 11′ Aluminum Walk-Around Body, Side compartments with adjustable shelving (20″ deep), Rear open compartment (49″W x 11′D x 48″H) for water tank and pump unit. All exterior compartments equipped with hinged aluminum doors. Sikkens 5 Year Paint Warranty.
NFPA compliant warning light package includes: LED light bar, Strobe lights, and LED Light package, 3 41Z15 scene lights (2) to rear and (1) each side rear wheel well area, Code 3 electronic siren with (2) CPI 100 watt speakers.
Odin Darley Weapon: Water pump and air compressor driven by liquid cooled 41 HP Lombardini turbo diesel engine with remote start in cab, Darley 2 2 AGE single stage centrifugal pump with aluminum case, bronze impeller on stainless steel shaft. Designed to provide approx. 325 G.P.M. of plain water flow and pressures up to 300 PSI, 12 volt Darley electric primer provides for full drafting capabilities through the Akron 2 2″ suction inlet at control panel, (1) 2 2″ direct tank fill line with check valve and cap, Pump capacity approx. 250 G.P.M. @ 150 PSI, 120 G.P.M. @ 250 PSI, 200 G.P.M. @ 200 PSI, 50 G.P.M. @ 300 PSI, (1) 1 2″ outlet using Akron ball valve on control panel, Independent mix points for air and foam solution provided at control panel designed to provide foam solution and air at approximately 50 GPM and 50 CFM simultaneously, (2) front spray bars controlled by electric valves operable from the drivers position, Air compressor is continuous duty Bauer B-101 rotary screw type which is able to unload or freewheel or be pressure governed automatically by the water pressure balancing valve. The air compressor system rated to supply approx. 100 CFM of air and include pressurized oil lubrication system, oil separator, oil filter, and modulating inlet air control, Foam Pro 2001 automatic direct injection system capable of maintaining a solution ratio of as low as 0.1% Class A foam at flow rates of near 20 GPM to a minimum of 250 GPM, Remote Foam Pro control in cab, (1) Ha nnay front RH booster hose reel with 100 feet of 1″ ID light weight hose, (1) front LH 1 2″ deck gun, 350 gallon UPF poly water tank with 20 gallon Foam tank internal of the water tank.
Overall Dimensions: OAL 258″ (21′-6″), OAW 96″ (8′-0″), OAH 89″ (7′-5″). Weights: Front 5,100 lbs., Rear 12,500 lbs.
$105,000
Contact us if you have any question about this pumper truck.
